- 400-090-9199
Swan Laser10+Laser10S line array speakers
$ -
Postage : $0.00
Pro Audio Line array LR series Line array speaker
|
Product Description |
||
|
Laser series is a new line array speaker system launched by Swan company. It adopts a special three-point hanging system structure to form a good vertical coverage directivity, high continuous sound pressure level, large dynamic and good transient. With its laser series ultra-low frequency speaker, it can achieve good sound reinforcement effect with ideal external frequency division combination configuration.
This system is especially suitable for the sound reinforcement needs of various gymnasiums, great hall, auditorium, theater, performing arts hall, multi-functional conference room and so on; It is also equipped with special hangers, pins, various connectors and automatic positioning devices for the direction area of patented sound reinforcement.
|
||
|
Technical Parameter |
||
|
Model |
Laser10 |
Laser10S |
|
Type |
External two-way speakers |
Sub-woofer speakers |
|
Frequency Range |
LF：60Hz-3KHz HF :1KHz-22KHz |
30Hz-250Hz |
|
Rated Power |
LF：350W HF：150W |
800W |
|
Sensitivity |
LF：100dB HF：112dB |
100dB |
|
SPL（peak） |
LF：132dB HF：140dB |
137dB |
|
Rated Impedance |
LF：16Ω HF：16Ω |
8Ω |
|
Unit Configuration |
LF：1*10"（65mm）Nd HF：1*2.6"（65mm）Nd |
1*18（100mm）Nd |
|
Connection |
LF（3+，4-） HF（5+，6-） |
（1+，1-） |
|
Direction system |
Laser pointing input1+，1-（Optional accessories） |
/ |
|
Hanging System |
Special array hanging system |
Special array hanging system |
|
Coverage（H×V） |
100×10° |
/ |
|
Front Protection |
Black steel( water resistant mesh) |
Black steel( water resistant mesh) |
|
Wood |
Plywood |
Plywood |
|
Finish |
Black wear-resistant polyurea waterproof painting |
Black wear-resistant polyurea waterproof painting |
|
Installation |
Hanging、Stand |
Hanging、Stand |
|
Dimension（mm）（W×H×D） |
660×303×470 |
666×555×730 |
|
N.W.(±10%) |
26.5KG |
61KG |
|
Dimensions and Structural |
||
|
|
||
|
Instructions for laser pointing and positioning in the sound reinforcement area |
||
|
1. First make sure that the power amplifier and the 8-pin waterproof speaker stand (1+, 1-) port are connected correctly, input a low voltage 15KHz sine wave signal, you will hear the slight high frequency sound of the woofer, and then continue to slowly increase the input signal voltage , until the laser light outlet on the front of the speaker emits a stable beam, and the projection position of the beam is the sound reinforcement pointing area of the speaker.
Note: When using this function, please mute the ports (3+, 3-) to prevent the speakers from being burned.
2. Schematic diagram of laser beam positioning, as shown in the figure.
Note: This pointing system is an optional accessory, please make sure that the speaker has this function before using it.
|
||
|
Assembly Schematic (Take Laser20 as an example) |
||
|
|
||
|
Installation |
||
|
|
||
No relative downloads now.
Guess you like
