!Oops... HiVi SWANS no longer supports this browser. To ensure network security and user experience, please upgrade to IE11/EDGE for the best experience.
Swan W10 woofer speaker
$ -
Postage : $0.00
W Series
Stock: 0

Using German KEVLAR reinforced paper-based composite material diaphragm, Santoprene high loss, high compliance, ultra-thin fatigue-resistant rubber ring, flat and wide frequency response, good transient characteristics, mellow tone, and low mid-low frequency distortion. High heat dissipation coating, no eddy current loss, high bearing power, 76 mm voice coil and high temperature resistant SV line voice coil, high power capacity, high performance magnetic circuit system, long stroke linear displacement design, high definition and resolution, no mechanical or thermal compression produce. The finite element precision computer simulation design integrates the high-density aluminum basin frame to eliminate parasitic structural resonance, and there is no sense of sound pollution. Hewitt's symmetrical magnetic field (SMD) drive technology makes the voice coil in a symmetrical driving magnetic field, so as to obtain a symmetrical driving force, significantly reduce the mutual modulation of the voice coil inductance and the back electromotive force, and improve the control characteristics of the speaker, and the bass is full and powerful. , the distortion is low.

 W10 is optimized for the reproduction of clean and dynamic very low frequencies at high power in small to medium vented speakers. In order to avoid air compression and internal air resonance, the W10 adopts an inner opening structure.

W10 can be widely used in A/V occasions. The W10 is an excellent unit for mid-sized speaker systems. W10 adopts Swans leading Small/Thiele parameter optimization design technology to facilitate the optimal design of the cabinet.

Impedance Curve

Frequency Response Curve

Mechanical Dimensions

Swan W10 woofer technical parameters
Rated impedance
Resonant frequency 35Hz
Rated power 150W
Maximum power 300W
Sensitivity (2.83v/1m) 90dB
Weight 5.9kg
Voice coil diameter 76mm
DC resistance 6.5Ω
Voice coil width 22mm
Voice coil wire High temperature resistant SV wire
Voice coil frame High temperature resistance K
Magnetic circuit type External magnetic circuit
Magnet Material High Performance Ferrite
Force coefficient (BL value) 12.8N/A
Magnetic gap height 8.0mm
Maximum linear displacement 7.0mm
Compliance 442uM/N
Mechanical Q value 2.02 -
Electric Q value 0.45 -
Total Q value 0.37 -
Vibration mass 55.7g
Equivalent volume 81.4L
Cabinet type Inverted
Recommended net volume of box 45L
Phase Conductor Tuning Frequency 34Hz
Cabinet in free field -3db frequency 40Hz
No relative downloads now.
Guess you like