The WR series is a new waterproof shower line array external frequency crossover speaker system launched by HiVi. It is designed in accordance with the IPX6 international waterproof level standard and can meet the needs of professional sound reinforcement in unexpected rainy weather and various harsh environments with high water density. need. The WR series corrects the wave front to make it close to the plane wave transmission, so as to solve the problem of long-distance transmission. Through the special hanging system, multiple speakers can be quickly matched and connected to form a good vertical coverage surface line sound source. It has good directivity, high continuous sound pressure level, high dynamics and good transient state. It can achieve good sound reinforcement effect with its WR subwoofer and ideal external frequency division combination configuration.

This system is especially suitable for various indoor and outdoor gymnasiums, assembly halls, auditoriums, theaters, performance halls, multi-functional conference rooms and other sound reinforcement needs; and is equipped with special hangers, plugs, various connectors and patented sound reinforcement pointing areas automatic positioning device, etc.

Parameters

Model

WRL33

WRL33+

WRS3

WRS3+

Type

External two-way speakers

External two-way speakers

Three 18" subwoofers

Three 18" subwoofers

Frequency range

LF：50HZ-1KHz

MF+HF：500Hz-18KHz

LF:50Hz-1KHz

MF+HF:500Hz-18KHz

Front：30Hz-250Hz

Back：30Hz-250Hz

Front：30Hz-250Hz

Back：30Hz-250Hz

Rated power

LF：800W

MF+HF：600W

LF:900W

MF+HF:600W

Front：1200W

Back：600W

Front：1600W

Back：800W

Sensitivity

LF：102dB

MF+HF：115dB

LF:103dB

MF+HF:116dB

Front：102dB

Back：97dB

Front：103dB

Back：98dB

Max SPL

(Peak)

LF：137dB

MF+HF：148dB

LF:138dB

MF+HF:149dB

Front：139dB

Back：131dB

Front：141dB

Back：133dB

Rated impedance

LF：16Ω

MF+HF：8Ω

LF:8Ω

MF+HF:8Ω

Front：4Ω

Back：8Ω

Front：4Ω

Back：8Ω

Speaker configuration

LF：2*12”(75mm voice coil)ferromagnetic

MF :1*10”(75mm voice coil)ferromagnetic

HF :2*3”(75mm voice coil)Neodymium magnet

LF:2*12"(75mm voice coil)Neodymium 

MF:1*10"(75mm voice coil)ferromagnetic

HF:2*3"(75mm voice coil)Neodymium 

3*18”(100mm voice coil)ferromagnetic

3*18”(100mm voice coil)Neodymium 

Input connection

LF（1+，2-）

MF+HF：（3+，4-）

LF(1+,2-)

MF+HF(3+,4-)

Front（1+，2-）

Back（3+，4-）

Front（1+，2-）

Back（3+，4-）

Directive system

laser pointing input（1+，2-）

laser pointing input1+,2-

/

/

Hanging system

Dedicated array suspension system

Dedicated array suspension system

/

/

Coverage angle(HXV)

90°×7°

90°X7°

/

/

Front protection

Black hardened steel mesh (waterproof mesh)

Black hardened steel mesh (waterproof mesh)

Black hardened steel mesh (waterproof mesh)

Black hardened steel mesh (waterproof mesh)

Cabinet material

birch plywood

birch plywood

birch plywood

birch plywood

Environmentally friendly wear-resistant black polyurea waterproof paint

Environmentally friendly wear-resistant black polyurea waterproof paint

Environmentally friendly wear-resistant black polyurea waterproof paint

Environmentally friendly wear-resistant black polyurea waterproof paint

Install

hanging, stacking

hanging, stacking

Size(mm)

(WXHXD)

1130×366×583

1130X366X583

1136×545×994

1136×545×994

N.W.(±10%)

74KG

68Kg

107KG

95KG

Instructions for laser pointing and positioning in the sound reinforcement area

1. First make sure that the power amplifier and the 8-pin waterproof speaker stand (1+, 2-) port are connected correctly, input a low voltage 15KHz sine wave signal, you will hear the slight high frequency sound of the woofer, and then continue to slowly increase the input signal voltage , until the laser light outlet on the front of the speaker emits a stable beam, and the projection position of the beam is the sound reinforcement pointing area of the speaker. Note: When using this function, please mute the ports (3+, 4-) to prevent the speakers from being burned.
2. Schematic diagram of laser beam positioning, as shown in the figure.
Note: This pointing system is an optional accessory, please make sure that the speaker has this function before using it.